Spectrometer Software

Many of our spectrometers can be supplied with electronics that converts the analogue signal from the detector to a digital signal that can be read over e.g. USB. Your electronics options depend on the specific detector and spectrometer you are working with. In most cases, you basically have two software options; Use the Ibsen Evaluation Software for Windows or develop your own.

I want to use Ibsen’s Evaluation
Software for Windows
I want to develop my own
software

 

Evaluation Software for Windows

Ibsen’s evaluation software can be used to read, display and store spectra from your spectrometer and to configure various parameters.

The specific evaluation software you need depends on which detector your spectrometer is equipped with. The detector is given by the three digits in the product name. For example, the FREEDOM FSV-101 uses the CMOS S11639 detector (101).

Below you can find links to download the relevant evaluation software. You will need to get a password from your sales representative.

Uncooled spectrometers XXX-101/105/109 with DISB-101T

Uncooled spectrometers XXX-380 and XXX-101 with DISB-101

Uncooled spectrometers XXX-200/220//245/255/305/315

Cooled spectrometers XXX-392/420/445/465: Data control and TEC control

EAGLE Raman-S ENS-C316

EAGLE OCT-S EOS-121

Develop your own software

If you want to develop your own application software, we offer a command based software development kit for most of our spectrometers. The specific command structure depends on the spectrometer that you have as described below.

Uncooled spectrometers XXX-101/105/109

These spectrometers are using the DISB electronics with either a SPI or USB interface. The communication with the spectrometer can be done using low level read-write commands to the FPGA on the board.

Uncooled spectrometers XXX-380

These spectrometers are using the DISB electronics with either a SPI or USB interface. The communication with the spectrometer can be done using low level read-write commands to the FPGA on the board.

Uncooled spectrometers XXX-200/220/245/255/305/315

These spectrometers are using the VersaPic electronics with a USB interface. The communication with the spectrometer can be done using serial RS-232 like commands.

Cooled spectrometers XXX-392/420/445/465

These spectrometers are using the VersaPic electronics with a USB interface as well as a TE cooling controller board. The communication with the spectrometer can be done using serial RS-232 like commands.

EAGLE Raman-S ENS-C316

This spectrometer is using the Andor iVac 316 camera with a USB 2.0 connection. It can be integrated with MatLab, LabView, Visual Basic or C/C++.

EAGLE OCT-S EOS-121

This spectrometer is using Teledyne’s E2V OctoPlus camera with CameraLink interface. The communication with the camera is based on the RS-232 protocol.